COMPLETE EQUIPMENT SCHEDULE

Listing of CES items for the Ferret
Some items may not have been issued for particular models,
but as much as we have, we will list and show photos (if available).

Layout #1

  1. Wheel nut spanner

  2. Jack Handle

  3. Oil Can, 1/2 Pint

  4. Tommy Bar 3/4 Inch Diameter X 25 Inch Long

  5. Jack, Hydraulic, 4 Ton OR
    Jack, Screw Hand Lifting, Geared Triple Lifting 4 Ton, 7 Inch Closed, 18-1/2 Inch Extended Height

  6. Oil Can, 1 Quart

  7. Starting Handle

  8. Tool Bag

  9. Foot Pump (Tyres), 1/8 Inch BSP Thread, 30 Inch Connector

  10. Key, Engine Cover

  11. Wire Cutters (with Sheath)

  12. Key, Drain Plug

  13. Injector, Oil, 1/2 Pint W/Flex Spout

  14. Grease Gun

  15. Grease Gun, Alternative

  16. Pressure Gauge, Tyre (Pencil Type), 10-120 Lb/Sq Inch With Protective Case

  17. Pliers, 6 Inch

  18. Screwdriver, 5 Inch X 3/8 Inch Point, 10-1/4 L.O.A.

  19. Tommy Bar

  20. Hammer, 1-1/2 Pound

  21. Spanner, OJDE, 15/16 Inch x 1 Inch AF

  22. Spanner, OJDE, 9/16 Inch X 5/8 Inch AF

  23. Spanner, OJDE, 7/16 Inch X 1/2 Inch, AF

  24. Spanner, OJDE, 3/8 Inch X 7/16 Inch BSF

  25. Spanner, Box, 7/8 Inch X 15/16 Inch AF

  26. Spanner, Box, 5/8 Inch X 3/4 Inch AF

  27. Spanner, Box, 1/2 Inch X 9/16 Inch AF

  28. Key, Flywheel Plug

  29. Spanner, Sparking Plug

  30. Spanner, Adjustable, 12 Inch

LAYOUT #2

  1. Brush, Cleaning 11 Inch

  2. Funnel, Gasoline Filler

  3. Towing Rope, Mk 1, 15 Foot

  4. Bucket, Canvas 2 Gallon

  5. Brush, Cleaning 12 Inch

  6. Pickaxe Head, 4-1/2 Pound

  7. Shovel GS

  8. Pickaxe Helve

  9. Brush, Cleaning 14 Inch X 3 Inch X 7/8 Inch

  10. Padlock, IG, 4 Lever, 1-1/2 Inch (8)

  11. Matchet

  12. Sheath, Matchet

LAYOUT #3

  1. Water Container, Plastic, 5 Gallon
  2. Pots, Cooking (consisting of)
    Cooking Body
    Stove Mk 2
    Strap
    Pot, Cooking Lid
  3. Case, Signal Pistol
  4. Signal Pistol, No. 1, Mk 5
  5. Cooker, Portable, No. 2, Mk 1

LAYOUT #4

  1. Periscope, Tank, No. 17, Mk 3

  2. Inspection Light, No. 2, Mk 1

  3. Windscreen Assembly

  4. Sight, Periscope, AFV No. 2

  5. Anti-Dim

LAYOUT #5
(Browning Calibre .30)

  1. Cover, Spare Barrel

  2. Mount, Tripod

  3. Mounting Yoke

  4. Holdall

  5. Barrel (spare)

  6. Case, Cleaning Rod

  7. Extractor, Ruptured Cartridge

  8. Wrench, Socket (barrel plug)

  9. Fitting, Tripod

  10. Rod, Cleaning, Jointed

  11. Brushes, Cleaning .30 (wire)

  12. Wrench, Combination

  13. Extractor Assembly

  14. Bolt

  15. Barrel Extension

  16. Spring, Sear

  17. Cocking Lever

  18. Pin, Bolt

  19. Extractor

  20. Muzzle Cover

  21. Firing Pin

  22. Lock, Breech

  23. Pin, Lock Breech

  24. Spring, Cover

  25. Oil Can

  26. Case, Spare Parts

  27. Spring, Driving

  28. Spring Rod

LAYOUT #6
MG Calibre 7.62

  1. Cleaning Tool SA No. 4

  2. Brush, Cleaning, Piston and Gas Regulator

  3. Wallet, Spare Parts and Tools

  4. Brush, Cleaning, Chamber and Gas Cylinder

  5. Brush, Cleaning, Bore

  6. Brush, Cleaning, SA No. 3, Mk 1

  7. Oiler, Hand No. 1, Mk 1

  8. Rod, Cleaning 7.62 Barrel and Gas Cylinder Mk 1

  9. Tool, Removing Extractor

  10. Cleaning Tool MG 7.62

  11. Ring, Retaining

  12. Plug, Gas Regulator

  13. Nut, Regulator Spindle

  14. Extractor, Ruptured Cartridge

  15. Spring Assembly, Return

  16. Pin, Rear Mounting

  17. Breech Block and Piston Assembly

LAYOUT #7

  1. Screen Front Support Bar

  2. Screen Struts (short)

  3. Screen Repair Outfit

  4. Screen Struts (long)

OTHER ITEMS

  1. Bag, .30 BMG Spent Cartridge
  2. Extinguisher, Fire Universal Type, Hand Held, 4-1/2 Pound Fully Charged (3)
  3. Screen, Splinter (2)
  4. Cover, Smoke Discharger (left)
  5. Cover, Smoke Discharger (right)
  6. Pistol, Pyrotechnic 1 Inch, No. 1 Mk 5
  7. Gloves, Protective Wiring